Do30 Endotec Wire 1.20mm 15.0 Kg
SKU: DO3012*Sold per kg, min order qty 15.0kg, 1 unit = 1kg
Anti-wear coatings on parts subject to abrasion and erosion by small particles.
Gas-shielded metal cored wire developed for producing single pass.
$60.50 Inc. GST per KG
- FREE shipping on all orders over $200!
Mechanical characteristics
| Hardness as welded Rc | 63-68 |
Shielding gases
| Recommended gas: | 97.5% Ar, 2.5% CO2 |
| Alternative gases | 99% Ar, 1% CO2 82% Ar, 18% CO2 100% Ar |
| Flow rate | 12-16 L / min |
- hardness fully obtained in just one pass
- low heat input for low dilution
- excellent bead appearance, no spatter, high arc stability
- great flexibility in operation: 80-370 A
- exceptional all-position weld ability
Designed for protective coating of parts most subject to wear in activities such as:
Piling, brick and tile, quarries, dredging, earth moving. Especially suitable in mining/cement industries for:
Press screw heads, segments, humidifier paddles and segments, mixer blades and scrapers, drag chains, rotary excavator buckets.
Preparation
Remove old welding deposits and worn metal completely with Xuper Exotrode.
Preheating
Preheating depends on the steel’s Carbon Equivalent, and the work piece size, thickness and geometry.
| CE < 0.2: | preheat not essential |
| CE 0.2 – 0.4 : | preheat 100-200°C |
| CE 0.4 – 0.8 : | preheat 200-350°C |
Note that 12-14% Mn steels should never be preheated and the work piece temperature during welding should be kept below 250°C.
Welding current: (+) DCEP
Welding technique
For single pass, down hand welding applications. Push or pull the electrode at an angle of 70-80° to ensure optimal fusion. If required, a maximum second pass should only be executed while the weld is still hot.
Machining
The deposit is machineable by grinding. Arc or plasma cutting equipment may also be used
Products you might like
-
$165.00 (Inc. GST)
-
$76.31 (Inc. GST)
-
$71.75 (Inc. GST)
-
$58.04 (Inc. GST)
Reviews
There are no reviews yet.