Powder Eutalloy 10112 2.5Kg
SKU: 10112x2.5*Sold per kg, min order qty 2.5kg, 1 unit = 1kg
Ni-Cr-B-Si-Fe alloy and tungsten carbide.
“Eutalloy® 10112 (TungTec) is a nickel-based alloy with a high concentration of Diamax extra hard particles for enhanced wear resistance, in particular to abrasion. 60% tungsten carbides.
These and other maintenance-engineered properties make 10112 an ideal protective coating for steels and nickel alloys.
It can be safely recommended for protection of highly-stressed machine parts or tools.
Eutalloy® 10112 is made up of two basic components: a nickel matrix and hard Diamax particles.
The Diamax particles are in this case powdered tungsten carbide, with granulometry designed for maximum abrasion resistance.
Machine parts and tools protectively coated with Eutalloy® 10112 have been shown to increase their service life several times compared to the normal life of a new part or tool.
In addition to this enormous saving in basic investment (spare parts), additional savings are sometimes possible by using cheaper base metals (coated with TungTec) for the original parts.”
$462.00 Inc. GST
- FREE shipping on all orders over $200!
| Typical Coating Properties | |
|---|---|
| Matrix Hardness: | HRC 60 |
| Hot Hardness: | Up to 1000°F (538°C) |
| Micro Hardness: | Knoop of Tungsten Carbide, +1900 |
| Density: | 10.0 g/cc |
| Wear Resistance: (ASTM G-65 Schedule A volume loss) |
10 – 15 mm3 |
| Typical Powder Properites | |
| Nominal Composition: | Tungsten, Nickel, Chromium, Boron, Silicon, Iron, Carbon |
| Hall Flow Rate: | 12 seconds |
| Bulk Density: | 5.5 g/cc |
| Powder Coverage | 1 lb per 50 in2 @ 1/16’’ |
- Auger Points
- Coal Pulverizers
- Coveyor Chains
- Sand Slinger Cups
- Coal Feed Screws
- Post Hole Diggers
- Pug Mill Knives
- Debarker Knives
- Mixer Blades
- Wear Plates
- Fly Ash Chutes
- Drill Bits
- Plow Discs and Harrows
For Roughing:
Grinding Wheel Type: Green Silicon Carbide
Grit Size: 60 – 120
Grade: I – L
Structure: 5 – 6 – 7
Bond Type: Vitrified
Wheel Speed: 6500 ft. per minute
In-Feed: 0.001 inches per pass
Finishing: 0.0005 inches per pass
For Finishing:
Grinding Wheel Type: Aluminum Oxide
Grit Size: 120 or finer Concentration
Grade: I – L
Structure: 7 – 8 – 9
Bond Type: Vitrified
Wheel Speed: 6500 ft. per minute
In-Feed: 0.001 inches per pass
Finishing: 0.0005 inches per pass
FEPA std.:
Grinding Wheel Type: Diamond D151
Grit Size: 75
Grade: —
Structure: —
Bond Type: Metal
Wheel Speed: 18 – 22 meter/min.
In-Feed: 0.001 inches per pass
Finishing: 0.0005 inches per pass
Coolant:
Flood coolant with rust inhibitors in
2-5% concentration.
Notes:
1. Before grinding, all edges and ends of coating must be
chamfer ground.
2. Frequently dress the grinding wheel face to reduce
friction and heat.
Products you might like
-
$85.38 (Inc. GST)
-
$3,724.88 (Inc. GST)
-
$220.00 (Inc. GST)
Reviews
There are no reviews yet.